{"id":13986,"date":"2017-10-08T15:04:32","date_gmt":"2017-10-08T15:04:32","guid":{"rendered":"https:\/\/www.sahm-splice.com\/faq\/"},"modified":"2021-09-24T19:49:09","modified_gmt":"2021-09-24T17:49:09","slug":"faq","status":"publish","type":"page","link":"https:\/\/www.sahm-splice.com\/gb\/faq\/","title":{"rendered":"FAQ"},"content":{"rendered":"<h1>Splicing FAQ<\/h1>\n<div>Quick tutorials with tips, tricks and answers to frequently asked questions &#8211; perfect for learners who love to read a manual.<\/div>\n<ul>\n<li>\n<h2>Ferrules<\/h2>\n<div>\n<div class=\"uk-accordion\" uk-accordion=\"collapsible: true;\">\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">How do I swage an aluminum ferrule according to EN 13411-3?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>Please take a look at our splicing instructions for the ferrules <a href=\"wp-content\/uploads\/aluminium-zen-ferrules-13411-3-splicing-chart.pdf\" target=\"_blank\">ZEN 13411-3<\/a> (cylindrical) and <a href=\"wp-content\/uploads\/aluminium-zen-ferrules-13411-3-form-c-splicing-chart.pdf\"  target=\"_blank\">ZEN 13411-3 Type C<\/a> (conical).<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Which wire ropes are suitable for turn-back terminations acc. to EN 13411-3?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>Single layer, rotation resistant and parallel-closed stranded ropes conforming to EN 12385-4, stranded ropes conforming to EN 12385-5, spiral strand ropes conforming to EN 12385-10 and cable-laid ropes as specified in EN 13414-3. The maximum rope grade specified in the standard is 1960 N\/mm\u00b2. The types of rope lay shall be Ordinary or Lang lay.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Why is the inspection hole of my ZEN 13411-3 Type C ferrule closed after swaging?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>Most likely, the ferrule is positioned too far into the conical part of the swaging dies. Please note our <a href=\"wp-content\/uploads\/aluminium-zen-ferrules-13411-3-form-c-splicing-chart.pdf\" target=\"_blank\">splicing instructions<\/a>.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Which ferrule size is suitable for my rope?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>The correct allocation of rope and ferrule depends on the ferrule type and wire rope details. Please take a look at our splicing charts that you can find on the product pages of our <a href=\"gb\/product-category\/ferrules\/\">ferrules<\/a>.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Is an aluminium ferrule suitable for a stainless steel wire rope?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>NO! The aluminium ferrule would dissolve over time due to galvanic corrosion. Please use stainless steel or copper ferrules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Can I use the same swaging dies for aluminium\/copper and steel\/stainless steel ferrules?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>NO! Swaging dies for aluminium and copper ferrules have cutting edges for the excess material. These cuttting edges would be damaged if you use them for steel or stainless steel. Furthermore, these swaging dies have a different degree of hardness. Besides this general rule, you need special swaging dies for some of our ferrules due to a special diameter or shape after swaging.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/li>\n<li>\n<h2>Swaging Machines<\/h2>\n<div>\n<div class=\"uk-accordion\" uk-accordion=\"collapsible: true;\">\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">I have a SAHM swager from 1970. Will I still get spare parts or an instruction manual for this machine?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>Yes, please <a href=\"gb\/contact\/\">contact<\/a> us.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Which are the advantages of a 1-column press?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">The C-shape improves the accessability and this leads to a faster production cycle.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Which are the benefits of a down-stroke pressing machine?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Thanks to the fact that the piston comes from above, the workpiece remains in position during the swaging process and the seals are protected against dirt. In addition to that, the working height of our 2000t\/4000t swagers is reduced and that makes ground works or a platform around the machine unneccessary.\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">When does a swaging machine have to be serviced? Whom can I contact?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Swaging presses operate with high hydraulic pressure. Depending on the use of the machine, we recommend an annual inspection. Please <a href=\"gb\/contact\/\">contact<\/a> us.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Do you also repair machines of other manufacturers?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Yes, please <a href=\"gb\/contact\/\">contact<\/a> us.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Why does my swaging press not reach the maximum pressing force?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">This indicates a loss of oil pressure and may have various causes. Please <a href=\"gb\/contact\/\">contact<\/a> us.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/li>\n<li>\n<h2>Test Beds<\/h2>\n<div>\n<div class=\"uk-accordion\" uk-accordion=\"collapsible: true;\">\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">What can I test on a SAHM SPLICE test bed?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">These test beds are specially designed for non-destructive and destructive testing of wire ropes, fiber ropes, webbing slings, chains, shackles and other lifting devices etc. according to EN 12385 and EN 2307.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Which test types are available as a standard?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Various manual and automated test programs are available, including: Standard strength test, Strength testing with load holding, Destruction test according to EN12385 and EN 2307 (fiber cables), Cyclic life tests<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Is there a load limit for destruction tests on SAHM SPLICE test beds?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">No, our tensile testing machines can perform break tests up to 100% of their capacity.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Can the results be saved \/ printed?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Yes! The measurement data of the test are stored and can be processed as raw data in the EXCEL format at any time via a network or USB interface. The test report is automatically output in PDF format and is optionally available in German or English (other languages on request).<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">How often does my test bed have to be calibrated and who does it?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">In accordance with EN ISO 7500-1, the machine should be calibrated every 12 months at the latest or when a major repair took place. We offer worldwide calibration service up to 6MN. Please <a href=\"gb\/contact\/\">contact<\/a> us.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Does SAHM SPLICE also provide service and maintenance?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Yes, besides the annual calibration, we can adjust and maintain your machine as desired. In addition, our tensile testing machines have remote maintenance access.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Is it possible to equip my old test bed with a new control system?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Yes, SAHM SPLICE has modernized many tensile testing machines. Please <a href=\"gb\/contact\/\">contact<\/a> us.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/li>\n<li>\n<h2>Cutting &#038; Annealing Machines<\/h2>\n<div>\n<div uk-accordion=\"collapsible: true;\" class=\"uk-accordion\">\n<div class=\"el-item\">\n<p>        <a class=\"el-title uk-accordion-title\" href=\"#\">Why do the annealing machines 1224\/1225\/1226 have two hand wheels?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\" >\n<div class=\"el-content uk-panel uk-margin-top\">The reason for this is the wire rope construction. Depending on the direction of the rope, you should use the left or right wheel, in order to reach the best possible result.<\/div>\n<\/p><\/div>\n<\/p><\/div>\n<div class=\"el-item\">\n<p>        <a class=\"el-title uk-accordion-title\" href=\"#\">How do I anneal  a non-rotating cable with the machines 1224\/1225\/1226?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\" >\n<div class=\"el-content uk-panel uk-margin-top\">By using both hand wheels at the same time.<\/div>\n<\/p><\/div>\n<\/p><\/div>\n<div class=\"el-item\">\n<p>        <a class=\"el-title uk-accordion-title\" href=\"#\">How do I increase the life time of my annealing machine?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\" >\n<div class=\"el-content uk-panel uk-margin-top\">By keeping the machine and especially the clamping jaws and other contact surfaces clean. In addition you should lubricate our machines 1224\/1225\/1226 with grease daily. Please follow the instructions of our operator&#8217;s manual.<\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>\n<\/li>\n<li>\n<h2>Tools &#038; Accessories<\/h2>\n<div>\n<div class=\"uk-accordion\" uk-accordion=\"collapsible: true;\">\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">How can I increase the life time of my swaging dies?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Make sure that the dies are properly aligned and clean. Grease the swaging bores before each swaging process and do not use more pressure than necessary.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">How do I know that I need new swaging dies?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">The indications are:<\/div>\n<div class=\"el-content uk-panel uk-margin-top\">\n<ul class=\"uk-list uk-list-bullet\">\n<li>Ferrule diameter after swaging is too large or too small<\/li>\n<li>Ferrule is stuck in the swaging dies after swaging<\/li>\n<li>The cutting edges are bent<\/li>\n<li>The swaging dies show cracks<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Why shouldn&#8217;t I use damaged swaging dies?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">Defective swaging dies can lead to injuries and insufficient swaging results.<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Can I use the same swaging dies for aluminium\/copper and steel\/stainless steel ferrules?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">\n<p>NO! Swaging dies for aluminium and copper ferrules have cutting edges for the excess material. These cuttting edges would be damaged if you use them for steel or stainless steel. Furthermore, these swaging dies have a different degree of hardness. Besides this general rule, you need special swaging dies for some of our ferrules due to a special diameter or shape after swaging.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"el-item\"><a class=\"el-title uk-accordion-title\" href=\"#\">Can I swage and mark the ferrules in one step with your marking system?<\/a><\/p>\n<div class=\"uk-accordion-content uk-margin-remove-first-child\">\n<div class=\"el-content uk-panel uk-margin-top\">No. The marking of the aluminium ferrule needs less pressure. If you do it in one step or with full pressure, you would reduce the life time of the marking plates.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/li>\n<\/ul>\n<div>Any more questions?<\/div>\n<div>Send us an email or give us a call.<\/div>\n<p>\n    <a href=\"contact\/\">Contact<\/a>\n<\/p>\n<ul>\n<li>\n<p>        <img decoding=\"async\" src=\"wp-content\/uploads\/icon-ferrule-clean-black.svg\" alt=\"\"><\/p>\n<h3>Ferrules<\/h3>\n<p><a href=\"knowledge-base\/faq\/ferrules\">more <\/a><\/p>\n<\/li>\n<li>\n<p>        <img decoding=\"async\" src=\"wp-content\/uploads\/icon-swaging-machine-clean-black.svg\" alt=\"\"><\/p>\n<h3>Swaging machines<\/h3>\n<p><a href=\"knowledge-base\/faq\/swaging-machines\">more <\/a><\/p>\n<\/li>\n<li>\n<p>        <img decoding=\"async\" src=\"wp-content\/uploads\/icon-testbed-clean-black.svg\" alt=\"\"><\/p>\n<h3>Test beds<\/h3>\n<p><a href=\"knowledge-base\/faq\/test-beds\">more <\/a><\/p>\n<\/li>\n<li>\n<p>        <img decoding=\"async\" src=\"wp-content\/uploads\/icon-cutting-clean-black-v2.svg\" alt=\"\"><\/p>\n<h3>Cutting &#038; Annealing Machines<\/h3>\n<p><a href=\"knowledge-base\/faq\/cutting-annealing-machines\">more <\/a><\/p>\n<\/li>\n<li>\n<p>        <img decoding=\"async\" src=\"wp-content\/uploads\/icon-tools-clean-black.svg\" alt=\"\"><\/p>\n<h3>Tools &#038; Accessoires<\/h3>\n<p><a href=\"knowledge-base\/faq\/tools\">more <\/a><\/p>\n<\/li>\n<li>\n<p>        <img decoding=\"async\" src=\"wp-content\/uploads\/icon-instructions-clean-black-v2.svg\" alt=\"\"><\/p>\n<h3>Instructions<\/h3>\n<p><a href=\"knowledge-base\/faq\/instructions\">more <\/a><\/p>\n<\/li>\n<\/ul>\n<h2>Annealing<\/h2>\n<ul>\n<li>\n<h3>Flames are produced during the annealing of the wire ropes. Is this harmful to the machine?<\/h3>\n<div>No, our special fan drains the evaporation.<\/div>\n<\/li>\n<li>\n<h3>Why does the SAHM SPLICE annealing machine have two hand wheels?<\/h3>\n<div>The left or right wheel is used depending on the direction of the rope. This leads to an optimal result.<\/div>\n<\/li>\n<li>\n<h3>How do I anneal  a non-rotating cable?<\/h3>\n<div>By using both hand wheels at the same time.<\/div>\n<\/li>\n<li>\n<h3>I need a an annealing machine, which  voltage connection do I have to provide?<\/h3>\n<div>230V or 400V with a suitable fuse. Please contact us.<\/div>\n<\/li>\n<li>\n<h3>How do I increase the life of my annealing machine?<\/h3>\n<div>By cleanig  and greasing the clamping jaws and clamping heads daily.<\/div>\n<\/li>\n<\/ul>\n<h2>Ferrules<\/h2>\n<ul>\n<li>\n<h3>How do I swage  an aluminum ferrule according to the EN standard?<\/h3>\n<div>\n<p>According to EN 13411-3,  as a developer of the ferrule system we recommend its swaging  in a single pass on the entire length of the ferrule. For more information, see our processing instructions.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>Which wire rope types are ferrules suitable?<\/h3>\n<div>\n<p>Single layer, rotation resistant and parallel-closed stranded ropes confirming to EN 12385-4, stranded ropes conforming to EN 12385-5, spiral strand ropes conforming to EN 12385-10 and cable-laid ropes as specified in EN 13414-3.<br \/>\nThe maximum rope grade is to be 1960. The types of rope lay shall be Ordinary or Lang lay.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>What ferrule do I need for my wire rope?<\/h3>\n<div>\n<p>For the correct assignment of the ferrule following information are needed:<\/p>\n<ol>\n<li>the measured rope diameter<\/li>\n<li>the type of rope (or Construction Company) and the deposit<\/li>\n<li>the factor for the metallic cross section of the rope<\/li>\n<\/ol>\n<p>With this information you will be able to chose the right ferrule in our splicing table.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>Why is the inspection hole of the Form C  closed after swaging?<\/h3>\n<div>\n<p>Most likely, the ferrule is positioned too far into the conical part of the swaging dies. Please note our splicing  instructions.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>May I swage an aluminum ferrule on a stainless steel wire rope?<\/h3>\n<div>\n<p>No! The Alu ferrule would dissolve over time. Please use stainless steel or copper ferrules.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>Do I need special swaging dies for steel ferrules?<\/h3>\n<div>\n<p>Yes, swaging dies for steel ferrules have no cutting edge and are especially hardened.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>To what temperature range may I use a Flemish Eye ferrule?<\/h3>\n<div>\n<p>From -40\u00b0 C to  +400\u00b0 C. At temperatures above +250\u00b0 C to +400\u00b0 C the WLL capacity of the wire ropes must be reduced to 75%.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>To what temperature range may I use an aluminum ferrule?<\/h3>\n<div>\n<p>From -40\u00b0 C to +150\u00b0 C with a steel core and -40\u00b0 C to +100\u00b0 C with a fiber core.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>To what temperature range may I use an aluminum ferrule?<\/h3>\n<div>\n<p>From -40\u00b0 C to +150\u00b0 C with a steel core and -40\u00b0 C to +100\u00b0 C with a fiber core.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>To what temperature range may I use an aluminum ferrule?<\/h3>\n<div>\n<p>From -40\u00b0 C to +150\u00b0 C with a steel core and -40\u00b0 C to +100\u00b0 C with a fiber core.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>To what temperature range may I use an aluminum ferrule?<\/h3>\n<div>\n<p>From -40\u00b0 C to +150\u00b0 C with a steel core and -40\u00b0 C to +100\u00b0 C with a fiber core.<\/p>\n<\/div>\n<\/li>\n<\/ul>\n<h2>Swagers<\/h2>\n<ul>\n<li>\n<h3>I have a SAHM-Seilklemmenpresse from 1970. Will I still get  spare parts or an instruction manual for this machine?<\/h3>\n<div>\n<p>Yes, please contact us.<\/p>\n<\/div>\n<\/li>\n<li>\n<h3>Which are the advantages of a 1-column press?<\/h3>\n<div>Improved accessibility makes work faster and easier.<\/div>\n<\/li>\n<li>\n<h3>Which are the benefits of a down-stroke pressing machine?<\/h3>\n<div>The pressing piston comes from above: the workpiece does not move, the working height is lower, the cylinder seals are protected against dirt.<\/div>\n<\/li>\n<li>\n<h3>When does a  swaging machine  have to be serviced? Whom can I contact?<\/h3>\n<div>Swaging presses operate with high hydraulic pressure. Depending on the use of the machine, we recommend an annual inspection. Please contact us.<\/div>\n<\/li>\n<li>\n<h3>Do you also repair machines of other manufcaturers?<\/h3>\n<div>Yes, please contact us.<\/div>\n<\/li>\n<li>\n<h3>Why does my swaging press not reach the maximum pressing force?<\/h3>\n<div>This indicates a loss of oil pressure and may have various causes. Please contact us.<\/div>\n<\/li>\n<\/ul>\n<h2>Test Bed<\/h2>\n<ul>\n<li>\n<h3>What can I test on a SAHM SPLICE test bed?<\/h3>\n<div>These test beds are specially designed for non-destructive and destructive testing of wire ropes, fiber ropes, webbing slings, chains, shackles and other lifting devices etc. according to EN 12385 and EN 2307.<\/div>\n<\/li>\n<li>\n<h3>Which test types are available as a standard?<\/h3>\n<div>Various manual and automated test programs are available, including:  Standard strength test, Strength testing with load holding, Destruction test according to EN12385 and EN 2307 (fiber cables), Cyclic life tests<\/div>\n<\/li>\n<li>\n<h3>Can I use a test bed  also for a destruction test to the max. test capacity?<\/h3>\n<div>Yes, our tensile testing machines can perform a tensile test up to 100% of their capacity.<\/div>\n<\/li>\n<li>\n<h3>Can the results be saved \/ printed?<\/h3>\n<div>Yes! The measurement data of the test are stored and can be processed as raw data in the EXCEL format at any time via a network or USB interface. The test report is automatically output in PDF format and is optionally available in German or English.<\/div>\n<\/li>\n<li>\n<h3>How often does my test bed have to be calibrated and who does it?<\/h3>\n<div>In accordance with EN7500-1, the machine should be calibrated every 12 months at the latest. We will gladly perform this service for you. Please contact us.<\/div>\n<\/li>\n<li>\n<h3>Does SAHM SPLICE also provide service and maintenance?<\/h3>\n<div>Yes, besides the annual calibration, we can adjust and maintain your machine as desired. In addition, our tensile testing machines have remote maintenance access.<\/div>\n<\/li>\n<li>\n<h3>Is it possible to equip my old test bed with a new control system?<\/h3>\n<div>Yes, SAHM SPLICE has modernized many tensile testing machines. Please contact us.<\/div>\n<\/li>\n<\/ul>\n<h2>Tools<\/h2>\n<ul>\n<li>\n<h3>How can I increase the life time of my swaging dies?<\/h3>\n<div>Make sure that the pressing jaws are optimally aligned and clean. Grease the swaging bores before each swaging and do not use more than necessary pressing pressure.<\/div>\n<\/li>\n<li>\n<h3>How do I know that I need new swaging dies?<\/h3>\n<div>If the swaged diameter is too large or the ferrule is stuck in the swage bore or the cutting edges are bent or the swaging dies show cracks.<\/div>\n<\/li>\n<li>\n<h3>Why can&#8217;t I use damaged swaging dies?<\/h3>\n<div>Defective swaging dies can lead to personal injury.<\/div>\n<\/li>\n<li>\n<h3>Do I need special swaging dies for steel clamps?<\/h3>\n<div>Yes, swaging dies for steel clamps have no cutting edges and are particularly hardened.<\/div>\n<\/li>\n<\/ul>\n<p><!-- {\"name\":\"\",\"type\":\"layout\",\"children\":[{\"name\":\"HeroVid\",\"type\":\"section\",\"props\":{\"style\":\"secondary\",\"width\":\"default\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image_position\":\"top-center\",\"padding\":\"\",\"header_transparent\":\"light\",\"header_transparent_noplaceholder\":false,\"class\":\"demo\",\"image\":\"wp-content\\\/uploads\\\/ferrules-bg-01.jpg\",\"height\":\"\",\"image_size\":\"cover\",\"image_effect\":\"\",\"image_visibility\":\"\",\"image_parallax_bgx_start\":\"0\",\"image_parallax_bgx_end\":\"-60\",\"image_parallax_bgy_end\":\"\",\"image_parallax_bgy_start\":\"\",\"image_width\":\"1920\",\"image_height\":\"\",\"image_parallax_breakpoint\":\"s\",\"media_overlay\":\"rgba(17, 17, 17, 0.8)\",\"media_blend_mode\":\"\",\"video\":\"\",\"text_color\":\"\",\"width_expand\":\"\",\"animation\":\"\",\"video_width\":\"\",\"video_height\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"fixed_width\":\"large\",\"breakpoint\":\"m\",\"layout\":\"1-1\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"image\":\"\",\"image_effect\":\"parallax\",\"image_parallax_bgx_start\":\"\",\"image_parallax_bgx_end\":\"\",\"image_parallax_bgy_start\":-10,\"image_parallax_bgy_end\":-90,\"image_width\":\"\",\"image_height\":\"\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"h1\",\"content\":\"Splicing FAQ\",\"title_style\":\"\",\"title_decoration\":\"line\",\"animation\":\"none\",\"parallax_x_start\":\"\",\"parallax_x_end\":\"\",\"parallax_y_start\":\"\",\"parallax_y_end\":\"\",\"parallax_target\":false,\"parallax_easing\":\"\",\"margin\":\"small\",\"text_align\":\"center\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"center\",\"parallax_breakpoint\":\"s\",\"parallax_viewport\":\"0.95\",\"parallax_opacity_start\":\"1\",\"parallax_opacity_end\":\"0\",\"maxwidth\":\"xlarge\",\"maxwidth_breakpoint\":\"\",\"block_align\":\"center\",\"title_font_family\":\"\",\"title_color\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"text\",\"props\":{\"margin\":\"default\",\"column_breakpoint\":\"m\",\"content\":\"Quick tutorials with tips, tricks and answers to frequently asked questions - perfect for learners who love to read a manual.\",\"maxwidth\":\"xlarge\",\"text_style\":\"lead\",\"text_color\":\"\",\"text_size\":\"\",\"column\":\"\",\"text_align\":\"center\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth_breakpoint\":\"\",\"animation\":\"\",\"visibility\":\"\",\"block_align\":\"center\",\"position\":\"\",\"position_z_index\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\"}}]}]}]},{\"name\":\"\",\"type\":\"section\",\"props\":{\"style\":\"muted\",\"width\":\"small\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image_position\":\"center-left\",\"padding\":\"large\",\"image\":\"\",\"image_size\":\"\",\"image_effect\":\"fixed\",\"media_overlay\":\"rgba(242, 242, 242, 0.8)\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"animation\":\"\",\"padding_remove_bottom\":false,\"status\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"fixed_width\":\"large\",\"breakpoint\":\"m\",\"layout\":\"1-1\",\"width\":\"default\",\"margin\":\"large\",\"column_gap\":\"\",\"row_gap\":\"\",\"width_expand\":\"\",\"height\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"type\":\"switcher\",\"props\":{\"show_title\":true,\"show_meta\":true,\"show_content\":true,\"show_image\":true,\"show_link\":true,\"show_label\":true,\"show_thumbnail\":true,\"switcher_style\":\"tab\",\"switcher_thumbnail_svg_color\":\"emphasis\",\"switcher_position\":\"top\",\"switcher_align\":\"left\",\"switcher_grid_width\":\"auto\",\"switcher_grid_breakpoint\":\"m\",\"switcher_animation\":\"fade\",\"switcher_height\":false,\"title_element\":\"h2\",\"title_align\":\"top\",\"title_grid_width\":\"1-2\",\"title_grid_breakpoint\":\"m\",\"meta_style\":\"meta\",\"meta_align\":\"below-title\",\"image_svg_color\":\"emphasis\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"image_grid_breakpoint\":\"m\",\"switcher_thumbnail_width\":\"100\",\"switcher_thumbnail_height\":\"75\",\"link_text\":\"Read more\",\"link_style\":\"default\",\"margin\":\"default\",\"switcher_margin\":\"large\",\"switcher_grid_column_gap\":\"large\",\"switcher_grid_row_gap\":\"large\",\"title_style\":\"h2\",\"title_decoration\":\"\",\"title_font_family\":\"\",\"title_color\":\"\",\"title_grid_column_gap\":\"\",\"title_grid_row_gap\":\"\",\"title_margin\":\"\",\"meta_color\":\"\",\"meta_margin\":\"\",\"content_style\":\"\",\"content_margin\":\"medium\",\"image_border\":\"\",\"image_box_shadow\":\"\",\"image_box_decoration\":\"\",\"image_grid_column_gap\":\"\",\"image_grid_row_gap\":\"\",\"image_margin\":\"\",\"link_size\":\"\",\"link_margin\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"maxwidth\":\"\",\"maxwidth_breakpoint\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"text_align\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\",\"css\":\"\",\"class\":\"cstm-tab-switcher\"},\"children\":[{\"type\":\"switcher_item\",\"props\":{\"title\":\"Ferrules\",\"content\":\"\n\n<div class=\\\"uk-accordion\\\" uk-accordion=\\\"collapsible: true;\\\">\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">How do I swage an aluminum ferrule according to EN 13411-3?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>Please take a look at our splicing instructions for the ferrules <a href=\\\"wp-content\\\/uploads\\\/aluminium-zen-ferrules-13411-3-splicing-chart.pdf\\\" target=\\\"_blank\\\">ZEN 13411-3<\\\/a> (cylindrical) and <a href=\\\"wp-content\\\/uploads\\\/aluminium-zen-ferrules-13411-3-form-c-splicing-chart.pdf\\\"  target=\\\"_blank\\\">ZEN 13411-3 Type C<\\\/a> (conical).<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Which wire ropes are suitable for turn-back terminations acc. to EN 13411-3?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>Single layer, rotation resistant and parallel-closed stranded ropes conforming to EN 12385-4, stranded ropes conforming to EN 12385-5, spiral strand ropes conforming to EN 12385-10 and cable-laid ropes as specified in EN 13414-3. The maximum rope grade specified in the standard is 1960 N\\\/mm\\u00b2. The types of rope lay shall be Ordinary or Lang lay.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Why is the inspection hole of my ZEN 13411-3 Type C ferrule closed after swaging?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>Most likely, the ferrule is positioned too far into the conical part of the swaging dies. Please note our <a href=\\\"wp-content\\\/uploads\\\/aluminium-zen-ferrules-13411-3-form-c-splicing-chart.pdf\\\" target=\\\"_blank\\\">splicing instructions<\\\/a>.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Which ferrule size is suitable for my rope?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>The correct allocation of rope and ferrule depends on the ferrule type and wire rope details. Please take a look at our splicing charts that you can find on the product pages of our <a href=\\\"gb\\\/product-category\\\/ferrules\\\/\\\">ferrules<\\\/a>.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Is an aluminium ferrule suitable for a stainless steel wire rope?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>NO! The aluminium ferrule would dissolve over time due to galvanic corrosion. Please use stainless steel or copper ferrules.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Can I use the same swaging dies for aluminium\\\/copper and steel\\\/stainless steel ferrules?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>NO! Swaging dies for aluminium and copper ferrules have cutting edges for the excess material. These cuttting edges would be damaged if you use them for steel or stainless steel. Furthermore, these swaging dies have a different degree of hardness. Besides this general rule, you need special swaging dies for some of our ferrules due to a special diameter or shape after swaging.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\",\"thumbnail\":\"\",\"label\":\"\n\n<div class=\\\"cstm-tab-image-wrapper\\\"><img src=\\\"\\\/wp-content\\\/uploads\\\/icon-ferrule-clean-black.svg\\\"  class=\\\"cstm-tab-image uk-text-emphasis\\\" uk-svg ><\\\/div>\n\n<div class=\\\"uk-margin-small-top\\\">Ferrules<\\\/div>\"}},{\"type\":\"switcher_item\",\"props\":{\"title\":\"Swaging Machines\",\"content\":\"\n\n<div class=\\\"uk-accordion\\\" uk-accordion=\\\"collapsible: true;\\\">\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">I have a SAHM swager from 1970. Will I still get spare parts or an instruction manual for this machine?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>Yes, please <a href=\\\"gb\\\/contact\\\/\\\">contact<\\\/a> us.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Which are the advantages of a 1-column press?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">The C-shape improves the accessability and this leads to a faster production cycle.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Which are the benefits of a down-stroke pressing machine?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Thanks to the fact that the piston comes from above, the workpiece remains in position during the swaging process and the seals are protected against dirt. In addition to that, the working height of our 2000t\\\/4000t swagers is reduced and that makes ground works or a platform around the machine unneccessary. \\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">When does a swaging machine have to be serviced? Whom can I contact?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Swaging presses operate with high hydraulic pressure. Depending on the use of the machine, we recommend an annual inspection. Please <a href=\\\"gb\\\/contact\\\/\\\">contact<\\\/a> us.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Do you also repair machines of other manufacturers?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Yes, please <a href=\\\"gb\\\/contact\\\/\\\">contact<\\\/a> us.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Why does my swaging press not reach the maximum pressing force?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">This indicates a loss of oil pressure and may have various causes. Please <a href=\\\"gb\\\/contact\\\/\\\">contact<\\\/a> us.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\",\"thumbnail\":\"\",\"label\":\"\n\n<div class=\\\"cstm-tab-image-wrapper\\\"><img src=\\\"\\\/wp-content\\\/uploads\\\/icon-swaging-machine-clean-black.svg\\\" class=\\\"cstm-tab-image  uk-text-emphasis\\\" uk-svg ><\\\/div>\n\n<div class=\\\"uk-margin-small-top\\\">Swaging Machines<\\\/div>\"}},{\"type\":\"switcher_item\",\"props\":{\"title\":\"Test Beds\",\"content\":\"\n\n<div class=\\\"uk-accordion\\\" uk-accordion=\\\"collapsible: true;\\\">\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">What can I test on a SAHM SPLICE test bed?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">These test beds are specially designed for non-destructive and destructive testing of wire ropes, fiber ropes, webbing slings, chains, shackles and other lifting devices etc. according to EN 12385 and EN 2307.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Which test types are available as a standard?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Various manual and automated test programs are available, including: Standard strength test, Strength testing with load holding, Destruction test according to EN12385 and EN 2307 (fiber cables), Cyclic life tests<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Is there a load limit for destruction tests on SAHM SPLICE test beds?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">No, our tensile testing machines can perform break tests up to 100% of their capacity.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Can the results be saved \\\/ printed?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Yes! The measurement data of the test are stored and can be processed as raw data in the EXCEL format at any time via a network or USB interface. The test report is automatically output in PDF format and is optionally available in German or English (other languages on request).<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">How often does my test bed have to be calibrated and who does it?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">In accordance with EN ISO 7500-1, the machine should be calibrated every 12 months at the latest or when a major repair took place. We offer worldwide calibration service up to 6MN. Please <a href=\\\"gb\\\/contact\\\/\\\">contact<\\\/a> us.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Does SAHM SPLICE also provide service and maintenance?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Yes, besides the annual calibration, we can adjust and maintain your machine as desired. In addition, our tensile testing machines have remote maintenance access.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Is it possible to equip my old test bed with a new control system?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Yes, SAHM SPLICE has modernized many tensile testing machines. Please <a href=\\\"gb\\\/contact\\\/\\\">contact<\\\/a> us.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\",\"thumbnail\":\"\",\"label\":\"\n\n<div class=\\\"cstm-tab-image-wrapper\\\"><img src=\\\"\\\/wp-content\\\/uploads\\\/icon-testbed-clean-black.svg\\\" class=\\\"cstm-tab-image  uk-text-emphasis\\\" uk-svg ><\\\/div>\n\n<div class=\\\"uk-margin-small-top\\\">Test Beds<\\\/div>\"}},{\"type\":\"switcher_item\",\"props\":{\"title\":\"Cutting & Annealing Machines\",\"content\":\"\n\n<div uk-accordion=\\\"collapsible: true;\\\" class=\\\"uk-accordion\\\">\\n\\n        \n\n<div class=\\\"el-item\\\">\\n\\n        <a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Why do the annealing machines 1224\\\/1225\\\/1226 have two hand wheels?<\\\/a>\\n\\n        \n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\" >            \\n\\n        \n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">The reason for this is the wire rope construction. Depending on the direction of the rope, you should use the left or right wheel, in order to reach the best possible result.<\\\/div>        \\n        <\\\/div>        \\n    <\\\/div>\\n        \n\n<div class=\\\"el-item\\\">\\n\\n        <a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">How do I anneal  a non-rotating cable with the machines 1224\\\/1225\\\/1226?<\\\/a>\\n\\n        \n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\" >            \\n\\n        \n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">By using both hand wheels at the same time.<\\\/div>        \\n        <\\\/div>        \\n    <\\\/div>\\n        \\n        \n\n<div class=\\\"el-item\\\">\\n\\n        <a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">How do I increase the life time of my annealing machine?<\\\/a>\\n\\n        \n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\" >            \\n\\n        \n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">By keeping the machine and especially the clamping jaws and other contact surfaces clean. In addition you should lubricate our machines 1224\\\/1225\\\/1226 with grease daily. Please follow the instructions of our operator's manual.<\\\/div>        \\n        <\\\/div>        \\n    <\\\/div>\\n    \\n<\\\/div>\",\"thumbnail\":\"\",\"label\":\"\n\n<div class=\\\"cstm-tab-image-wrapper\\\"><img src=\\\"\\\/wp-content\\\/uploads\\\/icon-cutting-clean-black-v2.svg\\\" class=\\\"cstm-tab-image  uk-text-emphasis\\\" uk-svg ><\\\/div>\n\n<div class=\\\"uk-margin-small-top\\\">Cutting & Annealing Machines<\\\/div>\"}},{\"type\":\"switcher_item\",\"props\":{\"title\":\"Tools & Accessories\",\"content\":\"\n\n<div class=\\\"uk-accordion\\\" uk-accordion=\\\"collapsible: true;\\\">\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">How can I increase the life time of my swaging dies?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Make sure that the dies are properly aligned and clean. Grease the swaging bores before each swaging process and do not use more pressure than necessary.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">How do I know that I need new swaging dies?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">The indications are:<\\\/div>\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<ul class=\\\"uk-list uk-list-bullet\\\">\\n\n\n<li>Ferrule diameter after swaging is too large or too small<\\\/li>\\n\n\n<li>Ferrule is stuck in the swaging dies after swaging<\\\/li>\\n\n\n<li>The cutting edges are bent<\\\/li>\\n\n\n<li>The swaging dies show cracks<\\\/li>\\n<\\\/ul>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Why shouldn't I use damaged swaging dies?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">Defective swaging dies can lead to injuries and insufficient swaging results.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Can I use the same swaging dies for aluminium\\\/copper and steel\\\/stainless steel ferrules?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">\\n\n\n<p>NO! Swaging dies for aluminium and copper ferrules have cutting edges for the excess material. These cuttting edges would be damaged if you use them for steel or stainless steel. Furthermore, these swaging dies have a different degree of hardness. Besides this general rule, you need special swaging dies for some of our ferrules due to a special diameter or shape after swaging.<\\\/p>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n\n\n<div class=\\\"el-item\\\"><a class=\\\"el-title uk-accordion-title\\\" href=\\\"#\\\">Can I swage and mark the ferrules in one step with your marking system?<\\\/a>\\n\n\n<div class=\\\"uk-accordion-content uk-margin-remove-first-child\\\">\\n\n\n<div class=\\\"el-content uk-panel uk-margin-top\\\">No. The marking of the aluminium ferrule needs less pressure. If you do it in one step or with full pressure, you would reduce the life time of the marking plates.<\\\/div>\\n<\\\/div>\\n<\\\/div>\\n<\\\/div>\",\"thumbnail\":\"\",\"label\":\"\n\n<div class=\\\"cstm-tab-image-wrapper\\\"><img src=\\\"\\\/wp-content\\\/uploads\\\/icon-tools-clean-black.svg\\\" class=\\\"cstm-tab-image  uk-text-emphasis\\\" uk-svg ><\\\/div>\n\n<div class=\\\"uk-margin-small-top\\\">Tools & Accessories<\\\/div>\"}}]}]}]}]},{\"name\":\"\",\"type\":\"section\",\"props\":{\"style\":\"muted\",\"width\":\"default\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image_position\":\"center-left\",\"padding\":\"large\",\"image\":\"\",\"image_size\":\"\",\"image_effect\":\"fixed\",\"media_overlay\":\"rgba(242, 242, 242, 0.8)\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"animation\":\"\",\"status\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"fixed_width\":\"large\",\"breakpoint\":\"m\",\"layout\":\"1-1\",\"width\":\"small\",\"margin\":\"medium\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"div\",\"content\":\"Any more questions?\",\"text_align\":\"center\",\"title_color\":\"\",\"css\":\"\",\"margin_remove_bottom\":true,\"class\":\"\",\"title_style\":\"heading-small\",\"title_decoration\":\"\",\"title_font_family\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"margin\":\"\",\"maxwidth\":\"\",\"maxwidth_breakpoint\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"text\",\"props\":{\"margin\":\"default\",\"column_breakpoint\":\"m\",\"content\":\"Send us an email or give us a call.\",\"text_style\":\"lead\",\"text_align\":\"center\",\"css\":\"\",\"margin_remove_top\":true,\"text_color\":\"\",\"text_size\":\"\",\"column\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"maxwidth\":\"\",\"maxwidth_breakpoint\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}}]}]},{\"name\":\"\",\"type\":\"row\",\"props\":{\"fixed_width\":\"large\",\"breakpoint\":\"\",\"layout\":\"1-1\",\"column_gap\":\"small\",\"row_gap\":\"small\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"faq buttons\",\"type\":\"button\",\"props\":{\"margin\":\"default\",\"text_align\":\"center\",\"grid_column_gap\":\"medium\",\"grid_row_gap\":\"medium\",\"button_size\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"maxwidth\":\"\",\"maxwidth_breakpoint\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"button_item\",\"props\":{\"button_style\":\"primary\",\"icon_align\":\"right\",\"icon\":\"\",\"content\":\"Contact\",\"link\":\"contact\\\/\",\"link_target\":\"\"}}]}]}]}]},{\"name\":\"\",\"type\":\"section\",\"props\":{\"style\":\"muted\",\"width\":\"default\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image_position\":\"center-left\",\"padding\":\"large\",\"image\":\"\\\/wp-content\\\/uploads\\\/SS-schlaufe-bg-top-left.svg\",\"image_size\":\"\",\"image_effect\":\"fixed\",\"media_overlay\":\"rgba(242, 242, 242, 0.8)\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"animation\":\"\",\"padding_remove_bottom\":true,\"status\":\"disabled\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"fixed_width\":\"large\",\"breakpoint\":\"m\",\"layout\":\"1-1\",\"width\":\"default\",\"margin\":\"large\",\"column_gap\":\"\",\"row_gap\":\"\",\"width_expand\":\"\",\"height\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"grid\",\"props\":{\"show_title\":true,\"show_meta\":true,\"show_content\":true,\"show_image\":true,\"show_link\":true,\"grid_default\":\"1\",\"grid_medium\":\"3\",\"title_element\":\"h3\",\"meta_style\":\"meta\",\"meta_align\":\"below-title\",\"icon_ratio\":\"3\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"link_text\":\"more \",\"link_style\":\"default\",\"margin\":\"default\",\"text_align\":\"center\",\"panel_style\":\"card-default\",\"panel_size\":\"\",\"title_style\":\"h5\",\"link_target\":false,\"link_size\":\"small\",\"css\":\".el-content > ul > li > a {text-decoration:none;}\\n.el-content > ul > li > a:hover,\\n.el-content > ul > li > a:focus{text-decoration:underline;}\\n\\n.tm-child-list>ul>li:nth-child(n+2), .tm-child-list>ul>li>ul, .uk-list>li:nth-child(n+2), .uk-list>li>ul, .woocommerce .widget_product_categories ul>li:nth-child(n+2), .woocommerce .widget_product_categories ul>li>ul, .woocommerce-page .widget_product_categories ul>li:nth-child(n+2), .woocommerce-page .widget_product_categories ul>li>ul {\\n    margin-top: 0;\\n}\",\"filter_style\":\"tab\",\"filter_all\":true,\"filter_position\":\"top\",\"filter_align\":\"left\",\"filter_grid_width\":\"auto\",\"image_svg_color\":\"emphasis\",\"item_animation\":\"\",\"grid_small\":\"2\",\"grid_large\":\"\",\"grid_xlarge\":\"\",\"filter_margin\":\"\",\"title_display\":\"\",\"content_display\":\"\",\"item_maxwidth\":\"\",\"title_decoration\":\"\",\"title_color\":\"\",\"title_margin\":\"\",\"meta_color\":\"\",\"meta_margin\":\"\",\"content_style\":\"\",\"content_margin\":\"\",\"image_border\":\"\",\"image_box_shadow\":\"\",\"image_hover_box_shadow\":\"\",\"image_box_decoration\":\"\",\"icon_color\":\"\",\"image_margin\":\"\",\"link_margin\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth\":\"\",\"maxwidth_breakpoint\":\"\",\"visibility\":\"\",\"link_type\":\"element\",\"title_align\":\"top\",\"title_grid_width\":\"1-2\",\"panel_content_padding\":\"\",\"image_width\":\"120\",\"image_height\":\"120\",\"image_svg_inline\":true,\"class\":\"cstm-sahm-icon uk-preserve\",\"block_align\":\"\",\"grid_column_gap\":\"small\",\"grid_row_gap\":\"small\",\"filter_grid_column_gap\":\"\",\"filter_grid_row_gap\":\"\",\"filter_grid_breakpoint\":\"m\",\"title_grid_column_gap\":\"\",\"title_grid_row_gap\":\"\",\"title_grid_breakpoint\":\"m\",\"image_grid_column_gap\":\"\",\"image_grid_row_gap\":\"\",\"image_grid_breakpoint\":\"m\",\"title_hover_style\":\"reset\",\"title_font_family\":\"\",\"image_transition\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"grid_item\",\"props\":{\"title\":\"Ferrules\",\"content\":\"\",\"icon\":\"\",\"link\":\"knowledge-base\\\/faq\\\/ferrules\",\"image\":\"wp-content\\\/uploads\\\/icon-ferrule-clean-black.svg\"}},{\"name\":\"\",\"type\":\"grid_item\",\"props\":{\"title\":\"Swaging machines\",\"content\":\"\",\"icon\":\"\",\"link\":\"knowledge-base\\\/faq\\\/swaging-machines\",\"image\":\"wp-content\\\/uploads\\\/icon-swaging-machine-clean-black.svg\"}},{\"name\":\"\",\"type\":\"grid_item\",\"props\":{\"title\":\"Test beds\",\"content\":\"\",\"icon\":\"\",\"link\":\"knowledge-base\\\/faq\\\/test-beds\",\"image\":\"wp-content\\\/uploads\\\/icon-testbed-clean-black.svg\"}},{\"name\":\"\",\"type\":\"grid_item\",\"props\":{\"title\":\"Cutting & Annealing Machines\",\"content\":\"\",\"icon\":\"\",\"link\":\"knowledge-base\\\/faq\\\/cutting-annealing-machines\",\"image\":\"wp-content\\\/uploads\\\/icon-cutting-clean-black-v2.svg\"}},{\"name\":\"\",\"type\":\"grid_item\",\"props\":{\"title\":\"Tools & Accessoires\",\"content\":\"\",\"icon\":\"\",\"link\":\"knowledge-base\\\/faq\\\/tools\",\"image\":\"wp-content\\\/uploads\\\/icon-tools-clean-black.svg\"}},{\"name\":\"\",\"type\":\"grid_item\",\"props\":{\"title\":\"Instructions\",\"content\":\"\",\"icon\":\"\",\"link\":\"knowledge-base\\\/faq\\\/instructions\",\"image\":\"wp-content\\\/uploads\\\/icon-instructions-clean-black-v2.svg\"}}]}]}]}]},{\"name\":\"Annealing\",\"type\":\"section\",\"props\":{\"width\":\"default\",\"padding\":\"large\",\"style\":\"muted\",\"header_overlay\":\"\",\"animation\":\"\",\"padding_remove_top\":false,\"image_size\":\"\",\"image_position\":\"center-left\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image\":\"\\\/wp-content\\\/uploads\\\/icon-cutting-clean-black-v2.svg\",\"image_effect\":\"fixed\",\"image_parallax_bgy_end\":\"20\",\"image_parallax_bgy_start\":\"20\",\"image_parallax_bgx_start\":\"80\",\"image_parallax_bgx_end\":\"80\",\"image_visibility\":\"m\",\"image_parallax_breakpoint\":\"\",\"media_overlay\":\"rgba(242, 242, 242, 0.94)\",\"media_background\":\"#f2f2f2\",\"media_blend_mode\":\"luminosity\",\"image_width\":\"400\",\"image_height\":\"400\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"status\":\"disabled\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"layout\":\"1-1\",\"breakpoint\":\"m\",\"fixed_width\":\"medium\",\"margin\":\"xlarge\",\"width\":\"small\",\"column_gap\":\"\",\"row_gap\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"h2\",\"text_align\":\"left\",\"content\":\"Annealing\",\"title_style\":\"h6\",\"title_decoration\":\"line\",\"margin\":\"medium\",\"maxwidth\":\"medium\",\"text_align_breakpoint\":\"m\",\"text_align_fallback\":\"center\",\"maxwidth_breakpoint\":\"m\",\"title_font_family\":\"\",\"title_color\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"accordion\",\"props\":{\"multiple\":false,\"collapsible\":true,\"text_align\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth\":\"\",\"margin\":\"\",\"animation\":\"\",\"visibility\":\"\",\"show_image\":true,\"show_link\":true,\"title_element\":\"h3\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"link_text\":\"Read more\",\"link_style\":\"default\",\"block_align\":\"\",\"image_grid_breakpoint\":\"m\",\"image_svg_color\":\"emphasis\"},\"children\":[{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"No, our special fan drains the evaporation.\",\"title\":\"Flames are produced during the annealing of the wire ropes. Is this harmful to the machine?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"The left or right wheel is used depending on the direction of the rope. This leads to an optimal result.\",\"title\":\"Why does the SAHM SPLICE annealing machine have two hand wheels?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"title\":\"How do I anneal  a non-rotating cable?\",\"content\":\"By using both hand wheels at the same time.\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"title\":\"I need a an annealing machine, which  voltage connection do I have to provide?\",\"content\":\"230V or 400V with a suitable fuse. Please contact us.\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"By cleanig  and greasing the clamping jaws and clamping heads daily.\",\"title\":\"How do I increase the life of my annealing machine?\"}}]}]}]}]},{\"name\":\"Ferrules\",\"type\":\"section\",\"props\":{\"width\":\"small\",\"padding\":\"large\",\"style\":\"muted\",\"header_overlay\":\"\",\"animation\":\"\",\"padding_remove_top\":false,\"image_size\":\"\",\"image_position\":\"center-left\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image\":\"\\\/wp-content\\\/uploads\\\/icon-ferrule-clean-black.svg\",\"image_effect\":\"fixed\",\"image_parallax_bgy_end\":\"20\",\"image_parallax_bgy_start\":\"20\",\"image_parallax_bgx_start\":\"80\",\"image_parallax_bgx_end\":\"80\",\"image_visibility\":\"m\",\"image_parallax_breakpoint\":\"\",\"media_overlay\":\"rgba(242, 242, 242, 0.94)\",\"media_background\":\"#f2f2f2\",\"media_blend_mode\":\"luminosity\",\"image_width\":\"400\",\"image_height\":\"400\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"status\":\"disabled\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"layout\":\"1-1\",\"breakpoint\":\"m\",\"fixed_width\":\"medium\",\"margin\":\"xlarge\",\"width\":\"default\",\"column_gap\":\"\",\"row_gap\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"h2\",\"text_align\":\"left\",\"content\":\"Ferrules\",\"title_style\":\"h6\",\"title_decoration\":\"line\",\"margin\":\"medium\",\"maxwidth\":\"medium\",\"text_align_breakpoint\":\"m\",\"text_align_fallback\":\"center\",\"maxwidth_breakpoint\":\"m\",\"title_font_family\":\"\",\"title_color\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"accordion\",\"props\":{\"multiple\":false,\"collapsible\":true,\"text_align\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth\":\"\",\"margin\":\"\",\"animation\":\"\",\"visibility\":\"\",\"show_image\":true,\"show_link\":true,\"title_element\":\"h3\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"link_text\":\"Read more\",\"link_style\":\"default\",\"block_align\":\"\",\"image_grid_breakpoint\":\"m\",\"image_svg_color\":\"emphasis\",\"content_style\":\"\",\"content_margin\":\"\",\"image_border\":\"\",\"image_grid_column_gap\":\"\",\"image_grid_row_gap\":\"\",\"image_margin\":\"\",\"link_size\":\"\",\"link_margin\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"maxwidth_breakpoint\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>According to EN 13411-3,  as a developer of the ferrule system we recommend its swaging  in a single pass on the entire length of the ferrule. For more information, see our processing instructions.<\\\/p>\",\"title\":\"How do I swage  an aluminum ferrule according to the EN standard?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>Single layer, rotation resistant and parallel-closed stranded ropes confirming to EN 12385-4, stranded ropes conforming to EN 12385-5, spiral strand ropes conforming to EN 12385-10 and cable-laid ropes as specified in EN 13414-3.\\nThe maximum rope grade is to be 1960. The types of rope lay shall be Ordinary or Lang lay.<\\\/p>\",\"title\":\"Which wire rope types are ferrules suitable?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>For the correct assignment of the ferrule following information are needed:<\\\/p>\\n\n\n<ol>\\n    \n\n<li>the measured rope diameter<\\\/li>\\n    \n\n<li>the type of rope (or Construction Company) and the deposit<\\\/li>\\n    \n\n<li>the factor for the metallic cross section of the rope<\\\/li>\\n<\\\/ol>\\n\n\n<p>With this information you will be able to chose the right ferrule in our splicing table.<\\\/p>\",\"title\":\"What ferrule do I need for my wire rope?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>Most likely, the ferrule is positioned too far into the conical part of the swaging dies. Please note our splicing  instructions.<\\\/p>\",\"title\":\"Why is the inspection hole of the Form C  closed after swaging?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>No! The Alu ferrule would dissolve over time. Please use stainless steel or copper ferrules.<\\\/p>\",\"title\":\"May I swage an aluminum ferrule on a stainless steel wire rope?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>Yes, swaging dies for steel ferrules have no cutting edge and are especially hardened.<\\\/p>\",\"title\":\"Do I need special swaging dies for steel ferrules?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>From -40\\u00b0 C to  +400\\u00b0 C. At temperatures above +250\\u00b0 C to +400\\u00b0 C the WLL capacity of the wire ropes must be reduced to 75%.<\\\/p>\",\"title\":\"To what temperature range may I use a Flemish Eye ferrule?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>From -40\\u00b0 C to +150\\u00b0 C with a steel core and -40\\u00b0 C to +100\\u00b0 C with a fiber core.<\\\/p>\",\"title\":\"To what temperature range may I use an aluminum ferrule?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>From -40\\u00b0 C to +150\\u00b0 C with a steel core and -40\\u00b0 C to +100\\u00b0 C with a fiber core.<\\\/p>\",\"title\":\"To what temperature range may I use an aluminum ferrule?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>From -40\\u00b0 C to +150\\u00b0 C with a steel core and -40\\u00b0 C to +100\\u00b0 C with a fiber core.<\\\/p>\",\"title\":\"To what temperature range may I use an aluminum ferrule?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>From -40\\u00b0 C to +150\\u00b0 C with a steel core and -40\\u00b0 C to +100\\u00b0 C with a fiber core.<\\\/p>\",\"title\":\"To what temperature range may I use an aluminum ferrule?\"}}]}]}]}]},{\"name\":\"Swagers\",\"type\":\"section\",\"props\":{\"width\":\"default\",\"padding\":\"large\",\"style\":\"muted\",\"header_overlay\":\"\",\"animation\":\"\",\"padding_remove_top\":false,\"image_size\":\"\",\"image_position\":\"center-left\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image\":\"\\\/wp-content\\\/uploads\\\/icon-swaging-machine-clean-black.svg\",\"image_effect\":\"fixed\",\"image_parallax_bgy_end\":\"20\",\"image_parallax_bgy_start\":\"20\",\"image_parallax_bgx_start\":\"80\",\"image_parallax_bgx_end\":\"80\",\"image_visibility\":\"m\",\"image_parallax_breakpoint\":\"\",\"media_overlay\":\"rgba(242, 242, 242, 0.94)\",\"media_background\":\"#f2f2f2\",\"media_blend_mode\":\"luminosity\",\"image_width\":\"400\",\"image_height\":\"400\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"status\":\"disabled\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"layout\":\"1-1\",\"breakpoint\":\"m\",\"fixed_width\":\"medium\",\"margin\":\"xlarge\",\"width\":\"small\",\"column_gap\":\"\",\"row_gap\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"h2\",\"text_align\":\"left\",\"content\":\"Swagers\",\"title_style\":\"h6\",\"title_decoration\":\"line\",\"margin\":\"medium\",\"maxwidth\":\"medium\",\"text_align_breakpoint\":\"m\",\"text_align_fallback\":\"center\",\"maxwidth_breakpoint\":\"m\",\"title_font_family\":\"\",\"title_color\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"accordion\",\"props\":{\"multiple\":false,\"collapsible\":true,\"text_align\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth\":\"\",\"margin\":\"\",\"animation\":\"\",\"visibility\":\"\",\"show_image\":true,\"show_link\":true,\"title_element\":\"h3\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"link_text\":\"Read more\",\"link_style\":\"default\",\"block_align\":\"\",\"image_grid_breakpoint\":\"m\",\"image_svg_color\":\"emphasis\"},\"children\":[{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"\n\n<p>Yes, please contact us.<\\\/p>\",\"title\":\"I have a SAHM-Seilklemmenpresse from 1970. Will I still get  spare parts or an instruction manual for this machine?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Improved accessibility makes work faster and easier.\",\"title\":\"Which are the advantages of a 1-column press?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"The pressing piston comes from above: the workpiece does not move, the working height is lower, the cylinder seals are protected against dirt.\",\"title\":\"Which are the benefits of a down-stroke pressing machine?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Swaging presses operate with high hydraulic pressure. Depending on the use of the machine, we recommend an annual inspection. Please contact us.\",\"title\":\"When does a  swaging machine  have to be serviced? Whom can I contact?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Yes, please contact us.\",\"title\":\"Do you also repair machines of other manufcaturers?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"This indicates a loss of oil pressure and may have various causes. Please contact us.\",\"title\":\"Why does my swaging press not reach the maximum pressing force?\"}}]}]}]}]},{\"name\":\"Test Bed\",\"type\":\"section\",\"props\":{\"width\":\"default\",\"padding\":\"large\",\"style\":\"muted\",\"header_overlay\":\"\",\"animation\":\"\",\"padding_remove_top\":false,\"image_size\":\"\",\"image_position\":\"center-left\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image\":\"\\\/wp-content\\\/uploads\\\/icon-testbed-clean-black.svg\",\"image_effect\":\"fixed\",\"image_parallax_bgy_end\":\"20\",\"image_parallax_bgy_start\":\"20\",\"image_parallax_bgx_start\":\"80\",\"image_parallax_bgx_end\":\"80\",\"image_visibility\":\"m\",\"image_parallax_breakpoint\":\"\",\"media_overlay\":\"rgba(242, 242, 242, 0.94)\",\"media_background\":\"#f2f2f2\",\"media_blend_mode\":\"luminosity\",\"image_width\":\"400\",\"image_height\":\"400\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"\",\"header_transparent\":\"\",\"status\":\"disabled\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"layout\":\"1-1\",\"breakpoint\":\"m\",\"fixed_width\":\"medium\",\"margin\":\"xlarge\",\"width\":\"small\",\"column_gap\":\"\",\"row_gap\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"h2\",\"text_align\":\"left\",\"content\":\"Test Bed\",\"title_style\":\"h6\",\"title_decoration\":\"line\",\"margin\":\"medium\",\"maxwidth\":\"medium\",\"text_align_breakpoint\":\"m\",\"text_align_fallback\":\"center\",\"maxwidth_breakpoint\":\"m\",\"title_font_family\":\"\",\"title_color\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"accordion\",\"props\":{\"multiple\":false,\"collapsible\":true,\"text_align\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth\":\"\",\"margin\":\"\",\"animation\":\"\",\"visibility\":\"\",\"show_image\":true,\"show_link\":true,\"title_element\":\"h3\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"link_text\":\"Read more\",\"link_style\":\"default\",\"block_align\":\"\",\"image_grid_breakpoint\":\"m\",\"image_svg_color\":\"emphasis\"},\"children\":[{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"These test beds are specially designed for non-destructive and destructive testing of wire ropes, fiber ropes, webbing slings, chains, shackles and other lifting devices etc. according to EN 12385 and EN 2307.\",\"title\":\"What can I test on a SAHM SPLICE test bed?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Various manual and automated test programs are available, including:  Standard strength test, Strength testing with load holding, Destruction test according to EN12385 and EN 2307 (fiber cables), Cyclic life tests\",\"title\":\"Which test types are available as a standard?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Yes, our tensile testing machines can perform a tensile test up to 100% of their capacity.\",\"title\":\"Can I use a test bed  also for a destruction test to the max. test capacity?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Yes! The measurement data of the test are stored and can be processed as raw data in the EXCEL format at any time via a network or USB interface. The test report is automatically output in PDF format and is optionally available in German or English.\",\"title\":\"Can the results be saved \\\/ printed?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"In accordance with EN7500-1, the machine should be calibrated every 12 months at the latest. We will gladly perform this service for you. Please contact us.\",\"title\":\"How often does my test bed have to be calibrated and who does it?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Yes, besides the annual calibration, we can adjust and maintain your machine as desired. In addition, our tensile testing machines have remote maintenance access.\",\"title\":\"Does SAHM SPLICE also provide service and maintenance?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Yes, SAHM SPLICE has modernized many tensile testing machines. Please contact us.\",\"title\":\"Is it possible to equip my old test bed with a new control system?\"}}]}]}]}]},{\"name\":\"Tools\",\"type\":\"section\",\"props\":{\"width\":\"default\",\"padding\":\"large\",\"style\":\"muted\",\"header_overlay\":\"\",\"animation\":\"\",\"padding_remove_top\":false,\"image_size\":\"\",\"image_position\":\"center-left\",\"vertical_align\":\"middle\",\"title_position\":\"top-left\",\"title_rotation\":\"left\",\"title_breakpoint\":\"xl\",\"image\":\"\\\/wp-content\\\/uploads\\\/icon-tools-clean-black.svg\",\"image_effect\":\"fixed\",\"image_parallax_bgy_end\":\"20\",\"image_parallax_bgy_start\":\"20\",\"image_parallax_bgx_start\":\"80\",\"image_parallax_bgx_end\":\"80\",\"image_visibility\":\"m\",\"image_parallax_breakpoint\":\"\",\"media_overlay\":\"rgba(242, 242, 242, 0.94)\",\"media_background\":\"#f2f2f2\",\"media_blend_mode\":\"luminosity\",\"image_width\":\"400\",\"image_height\":\"400\",\"text_color\":\"\",\"width_expand\":\"\",\"height\":\"expand\",\"header_transparent\":\"\",\"status\":\"disabled\"},\"children\":[{\"name\":\"\",\"type\":\"row\",\"props\":{\"layout\":\"1-1\",\"breakpoint\":\"m\",\"fixed_width\":\"medium\",\"margin\":\"xlarge\",\"width\":\"small\",\"column_gap\":\"\",\"row_gap\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"column\",\"props\":{\"image_position\":\"center-center\",\"media_overlay_gradient\":\"\"},\"children\":[{\"name\":\"\",\"type\":\"headline\",\"props\":{\"title_element\":\"h2\",\"text_align\":\"left\",\"content\":\"Tools\",\"title_style\":\"h6\",\"title_decoration\":\"line\",\"margin\":\"medium\",\"maxwidth\":\"medium\",\"text_align_breakpoint\":\"m\",\"text_align_fallback\":\"center\",\"maxwidth_breakpoint\":\"m\",\"title_font_family\":\"\",\"title_color\":\"\",\"position\":\"\",\"position_z_index\":\"\",\"block_align\":\"\",\"block_align_breakpoint\":\"\",\"block_align_fallback\":\"\",\"animation\":\"\",\"visibility\":\"\"}},{\"name\":\"\",\"type\":\"accordion\",\"props\":{\"multiple\":false,\"collapsible\":true,\"text_align\":\"\",\"text_align_breakpoint\":\"\",\"text_align_fallback\":\"\",\"maxwidth\":\"\",\"margin\":\"\",\"animation\":\"\",\"visibility\":\"\",\"show_image\":true,\"show_link\":true,\"title_element\":\"h3\",\"image_align\":\"top\",\"image_grid_width\":\"1-2\",\"link_text\":\"Read more\",\"link_style\":\"default\",\"block_align\":\"\",\"image_grid_breakpoint\":\"m\",\"image_svg_color\":\"emphasis\"},\"children\":[{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Make sure that the pressing jaws are optimally aligned and clean. Grease the swaging bores before each swaging and do not use more than necessary pressing pressure.\",\"title\":\"How can I increase the life time of my swaging dies?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"If the swaged diameter is too large or the ferrule is stuck in the swage bore or the cutting edges are bent or the swaging dies show cracks.\",\"title\":\"How do I know that I need new swaging dies?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Defective swaging dies can lead to personal injury.\",\"title\":\"Why can't I use damaged swaging dies?\"}},{\"name\":\"\",\"type\":\"accordion_item\",\"props\":{\"content\":\"Yes, swaging dies for steel clamps have no cutting edges and are particularly hardened.\",\"title\":\"Do I need special swaging dies for steel clamps?\"}}]}]}]}]}],\"props\":[],\"version\":\"1.22.8\"} --><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Splicing FAQ Quick tutorials with tips, tricks and answers to frequently asked questions &#8211; perfect for learners who love to read a manual. Ferrules How do I swage an aluminum ferrule according to EN 13411-3? Please take a look at our splicing instructions for the ferrules ZEN 13411-3 (cylindrical) and ZEN 13411-3 Type C (conical). [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-13986","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/pages\/13986","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/comments?post=13986"}],"version-history":[{"count":0,"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/pages\/13986\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.sahm-splice.com\/gb\/wp-json\/wp\/v2\/media?parent=13986"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}