sahm splice certifications

Ferrule - XL & Z

Aluminium ferrules for large wire ropes with a diameter above the splicing table of DIN EN 13411-3

Special characteristics:

  • Manufactured from seamless tube
  • Available in the sizes XL 52 – XL 90 and Z 94 + Z 102
  • For wire rope with a diameter of 46 - 102 mm
  • Swaged with our cylindrical swaging dies with cutting edges

Product Inquiry (all fields are optional)

Ferrule No.:
Special length in mm:

Ferrule section XL & Z

Splicing chart for our Steel Ferrule Type XL ferrules

1770 N/mm2 Grade Round strand rope Ø measured in mm

1 = 1770 N/mm2 Grade Round strand rope

2 = 1960 N/mm2 Grade Round strand rope

Remark: For accommodation of steel wire ropes with higher tensile grade than 1960 N/mm2 metallic area refer to our technical department.

Ferrule No. Rope Ø measured in mm Ferrule Ø in mm
after swaging
  1770 N/mm2 Grade Round strand rope 1960 N/mm2 Grade Round strand rope  
Ferrule No. C ≤ 0,487 *1
min./max.
C ≤ 0,487 *2
min./max.
mmFerrule Ø in mm after swaging
XL 52 46,3 50,7 45,6 48,9 100
XL 54 50,8 54,3 49 51,5 108
XL 56 54,4 58,2 51,6 55,8 116
XL 60 58,3 61,9 55,9 59,2 124
XL 64 62 65,8 59,3 63,4 132
XL 68 65,9 69,7 63,5 66,9 140
XL 72 69,8 73,6 67 71,2 148
XL 76 73,7 77,4 71,3 74,5 156
XL 80 77,5 81,3 74,6 78,8 164
XL 84 81,4 85,2 78,9 82,1 172
XL 88 85,35 89,1 82,2 86,5 180
XL 90 89,2 93,1 86,6 90,1 188
 
Z 94 - - 90,2 95,1 190
Z 102 - - 95,2 101,5 212
Z 102 - - 101,6 106,8 214

For accommodation of steel wire ropes with higher tensile grade than 1960 N/mm2 metallic area refer to our technical department.

We reserve the right to amend technical data.

Go to Product InquiryView Inquiry list