90t One Column Swaging Press
Most important characteristics:
- Down stroke press
- Very good accessibility
- Easy to use
- High performance
Suitable for the following ferrules:
Product Inquiry (all fields are optional)
Our hydraulic press in use
This video demonstrates working with our 415 kN swager. It illustrates the fundamental principle of swaging using an aluminium ferrule. This fundamental finishing process applies to our entire swager program. The integrated automatic function is very helpful if you have to process large batches: without taking your foot off the foot pedal, the press closes and opens again as soon as the set pressure has been reached. You can preset the return stroke in the process. This saves time and is ergonomic. The controls have similar design on our 900 kN, 3000 kN, 6000 kN, 12500 kN, 20000 kN and 4000 kN machines.
Images of our 90t One Column Swaging Press
|Max. pressure capacity||900||kN|
|Max. piston stroke||40||mm|
|Max. oil pressure||448||bar|
|Unloaded stroke speed (up to 280 kN)||10||mm/s|
|Loaded stroke speed||3,5||mm/s|
|Swaging die take up (W x H)||80 x 78||mm|
|With angle packings (w x h)||50 x 48||mm|
|Operating height||800 - 1180||mm|
|Power supply||4 kW / 400 V / 50 Hz|
|Stroke limit||smooth, electronic control|
|Dimensions (L x W x H)||1170 x 812 x 1360 - 1660||mm|
Cutting-edge technology from Germany, tested for decades under the most hostile conditions.
We use only high quality components from leading manufacturers or components specially manufactured to our standards, ensuring that your machine is ready for use at all times. We guarantee a supply of spare parts for 30 years.
Easy to use
It is particularly easy to operate since the ferrule is pressed from the top and the work piece does not move vertically with the piston. The controls are located at the right spot and you can operate them intuitively. Documentation and signage are provided in the local language.
Our presses comply with the current valid EU Machinery Directive 2006/42/EC and are manufactured according to ISO9001.
High speed / performance
Our presses stand apart thanks to their high engine performance and thus high press speeds. At low pressure, press speed is the maximum permissible 10 mm/s.Go to Product InquiryView Inquiry list